Timber Hoarding Vehicle Gates
Timber Hoarding Vehicle Gates seamlessly integrate with steel or timber hoarding systems, offering easy installation and adjustable height. With various sizes and colours available these gates enhance safety and efficiency with lightweight mesh designs that provide visibility and easy handling. All gates are designed with fit with dig-in posts & adjustable eye-bolts to connect the gate leafs directly to the posts.
Quickest Available Delivery: Quickest Available Delivery: 3 to 4 Week Delivery
Sturdy timber hoarding vehicle gates, featuring a durable mesh design, are widely utilized alongside steel or timber hoarding systems at building and construction sites. They seamlessly integrate with the hoarding, providing a perfect fit. Installation is a breeze, as the gate posts are securely positioned 600mm in-ground (adjustable to 1000mm if needed) and effortlessly connected to the gate leaf frames using a simple and adjustable eyebolt system. This allows you to easily modify the gate leaf height to match the contour of the ground.
Many individuals favor mesh gates over those with solid steel infill for several reasons. Firstly, timber hoarding vehicle gates with mesh are considerably lighter, simplifying manual installation. Additionally, the transparent nature of the mesh enhances safety by providing visibility of both sides when opening and closing.
Our gates come in a range of sizes to suit your specific needs. The most common heights are 2.0m, ideal for steel or low height timber hoarding, and 2.4m, suitable for the majority of timber hoarding. We also offer various widths, with 5.0m being the most popular choice, comfortably accommodating two lanes of traffic. For exceptionally active construction sites with a constant flow of large vehicles, we recommend larger gates with widths of 6.0m and 7.0m.
We provide the flexibility to paint or powder coat these timber hoarding gates according to your requirements. If you don't find the desired finish for your vehicle gate, simply reach out to us via email at sales@hermeq.com or call 0800 043 2520. While many construction and building sites often opt for painted gates (one-side) based on price, it's important to note that painting may result in an imperfect finish with potential running or chipping. For enhanced aesthetics, we recommend powder coating as a superior and more durable option.
When installing these gates, it is crucial to allow sufficient time for the posts to set. The common practice involves installing the posts, connecting the gate leafs, and providing adequate support to hold the gates in a fixed position until fully set. Premature removal of this support before the posts have properly settled can cause leaning.
HERMEQ stock a wide-range of Temporary Mesh Fencing, Acoustic Barriers, Tree Protection Fencing & Accessories conforming to all required safety specifications and regulations.
Need any help? Contact HERMEQ Today.
Contact our team via phone 0800 043 2520, email sales@hermeq.com or use our live chat feature between 8:00am & 17:00pm for help discovering our range.
Frames are made up of 60 x 40 x 2.0mm Hot Rolled Square Hollow Section.
Posts are made up of 100 x 100 x 4.0mm Hot Rolled Square Hollow Section.
The vehicle gate posts sit 600mm in-ground, subsequently they are 600mm longer than the size of the vehicle gate e.g. a 2.4 meter high vehicle gate will come with 3.0 meter vehicle gate posts.
The posts and vehicle gate frame are connected using an eyebolt system.
All of our heavy duty construction site vehicle gates come with a slide bolt allowing you to secure them shut and maximise site security.
Size: Our construction site vehicle gates are available in a range of sizes including 2.0 & 2.4 meter heights and 4, 5 & 6 meter widths.
Finish: Vehicle gates are normally painted (one-side). However we can have these painted or powder coated to suit your requirements, so if you do not see the option you would like please get in touch with a member of our team.