Acoustic Barriers
HERMEQ acoustic barriers control noise on construction and event sites. The range covers fence-mounted barrier panels and full-panel quilts, acoustic sheeting for scaffolding, a freestanding folding screen and enclosures for generators and cutting work. Hung on a site perimeter or set close to plant, they cut the noise that reaches neighbours and lower the levels people work in on site. The Echo products in the range are developed with the acoustic specialists at Echo Barrier and lab tested for noise reduction, fire and water resistance. The full range is held as permanent UK stock.
Temporary acoustic barriers for construction sites
The range divides into barriers that hang on a fence, hoarding or scaffold already on site, and a screen that stands on its own frame where there is nothing to hang from.
Single acoustic barrier panels
Single panels, often called acoustic blankets, are narrower than a fence panel. That makes them the format for hoarding, corners, short runs and positions that change as the work moves. One person can lift a panel off and rehang it further along, so a gang breaking out or cutting on a different section each day can move the screen with the work. The Echo H9 acoustic barrier is the lighter of the two panels, and the Echo H10 acoustic barrier has a biodegradable absorbent core and is built for long exposure to weather.
Full-panel acoustic quilts
Acoustic quilts, also sold as acoustic fence wrap or Heras noise barriers, cover a whole temporary fence panel with one unit. On a long perimeter that means fewer barriers to handle and fewer joins to seal, which shortens the time it takes to clad the run and leaves fewer gaps for sound to pass through. The Echo H8 acoustic quilt is the large-format quilt for big perimeters and phased projects, and the Echo HT 3.5 acoustic barrier is the Echo Barrier full-panel quilt for 3.5m fence runs.
Scaffolding acoustic sheeting
Where the noise comes off a building face, during demolition, facade work or works at height, scaffolding acoustic sheeting clads the scaffold or temporary structure itself. It is supplied in rolls, so a scaffold face is covered in long lengths with few joins. Two acoustic grades are available, and the sheeting can be matched to the noise limit set for the job.
Folding acoustic screens
Where there is no fence to hang a barrier on, the folding acoustic screen stands on its own wheeled frame next to the work. It suits demolition and utilities work where the noisy activity moves around the site, because one screen can follow a breaker or saw from position to position and fold away when the job is done.

Acoustic barriers for Heras fencing and hoarding
Fence-mounted barriers hang over the top rail of temporary mesh fencing or from the face of timber plywood hoarding and steel site hoarding. They are fixed through reinforced eyelets with cable ties or bungees, and neighbouring barriers join along hook-and-loop edges. A few checks before ordering decide how well the run performs.
Measure the fence panels first. A full-panel quilt should match the panel width, and single panels should divide evenly into it, so the run has no gaps or loose overlaps. Sound passes through any opening, so the screen needs to be continuous at every join, brought down close to the ground at the foot of the fence and carried across temporary fencing gates with barriers of their own. Where the noise source or the nearest windows sit above the top of the fence, extensions raise the height of the screen.
Cladding turns an open mesh fence into a solid face that catches the wind, so a clad run needs more support than bare mesh. Weight the feet with concrete ballast blocks and brace the line with fencing stays and clamps, with closer spacing on exposed or open ground.
Noise control at the source: enclosures and extensions
A generator, saw or grinder is better screened close to where its noise starts than answered with a longer perimeter, because a barrier near the source blocks more of the direct sound path with far less material.
Generator acoustic enclosures
The generator acoustic enclosure is built for small generators and site power units on a light aluminium frame, with two side panels and a removable roof. It sets up as a full enclosure, a part enclosure or a screen on one side, so the generator can be refuelled and inspected without taking the enclosure down. Roadworks, utility upgrades and reactive maintenance teams use it where a power unit has to run close to homes, hospitals or occupied buildings.
Acoustic enclosures for cutting and grinding
The acoustic enclosure for cutting and grinding is a wheeled booth that contains noise, dust and debris around saws, grinders and other power tools in a compact work area. Mesh viewing panels let a supervisor see the work, and configurable access points allow airflow. It comes in two configurations: the compact enclosure gives the higher attenuation, and the large one gives more room to work and easier access.
Acoustic fence extensions
The acoustic fence extension mounts on top of fencing, or beside generators and plant taller than 1.5m, to add height to the screen. A fence that stops below the top of a generator or a plant exhaust leaves the direct path to upper floors open, and the extension closes it without replacing the run. It can also be used overhead, where noise escapes upwards from a work area.

Acoustic barrier performance and ratings
Once the type is chosen, barriers across the range are compared on what their figures mean on site, the conditions they are rated for and how they handle between jobs.
Noise reduction and absorption figures
Every reduction and absorption figure in the range is a laboratory maximum, with noise reduction of up to 43dB across the range. Reduction describes how much less sound reaches the far side of the barrier, and absorption describes how much of the sound striking the face is taken in by the barrier instead of reflected back towards the work. The catalogue states that field results depend on site geometry.
Fire, water and cold resistance
The barriers are tested against the conditions of an exposed outdoor site. Fire resistance is tested to BS 7837 or classified to EN 13501-1, water and dust resistance to BS EN 60529 at IPX6 and IPX9, and cold resistance down to -40C, with UV-resistant outer faces for long periods in place. Reflective stripes and hazard markings keep a run visible to traffic and pedestrians after dark.
Handling, storage and reuse
Panels and quilts roll up or fold flat, so they arrive palletised and store in a small space between jobs, while the folding screen and enclosures collapse onto their own frames. The weatherproof outer face can be cleaned with a power washer, so barriers come down from one project clean enough to go straight onto the next.
Popular Categories

Temporary Site Hoarding
View Products >

Temporary Mesh Fencing
View Products >

Vehicle & Pedestrian Gates
View Products >
Frequently Asked Questions
How do acoustic barriers reduce noise?
An acoustic barrier places a dense, layered blanket in the path between the noise source and the people who would hear it. The Echo barriers combine a waterproof PVC outer face, a breathable membrane and a high-density absorbent core, so sound that reaches the barrier is soaked up inside it. Sound that travels over or around the barrier has further to go, which lowers the level that arrives at neighbouring buildings.
How long does it take to put up acoustic barriers?
A single acoustic panel can be hung by one person in under 30 seconds, and a full-panel quilt is hung by two people in a similar time with the installation kit. The fence extension needs two people and fits in about a minute.
Can acoustic barriers be used indoors?
Yes. The acoustic enclosure for cutting and grinding is made for indoor or outdoor use, from warehouse floors to maintenance work in occupied commercial buildings. Fence-mounted panels also hang on internal hoarding to screen a work area from the rest of a building.
Can acoustic barriers carry a company logo or message?
The Echo fence extension can be printed with non-flammable water-based ink, so a run can carry a company logo, project name or message to neighbours along a public frontage. The Echo HT 3.5 comes in opal green and black as standard, with other colours available on request. Printed fence and hoarding panels for the rest of the site are covered on the HERMEQ custom printing page.
How are acoustic barriers protected against theft?
The Echo HT 3.5 takes a security cable and carries a Datatag ID with a unique RFID number on every unit, so barriers can be locked along the run and identified if they go missing. On any run, fixing every eyelet to the fence with cable ties, instead of the corners alone, makes a barrier much slower to take down.










































































































































