Water Storage
HERMEQ supplies water storage tanks for construction sites, events, farms and industrial premises. The range runs from baffled bowser tanks that travel in a van to static tanks holding up to 25,000 litres. Potable, non-potable, insulated, underground and frost-proof industrial tanks hold a supply of water wherever mains access is limited or absent. Most of the range is rotationally moulded in one piece from polyethylene. The tanks hold water for dust suppression, welfare units, cleaning and wash-down, and temporary site operations. Every tank can be bought online with nationwide delivery.
Static, insulated and underground water storage tanks
Static tanks stand on a prepared base and stay in place for the length of a job or for good. Underground tanks sit below finished ground level, and bowser tanks carry water to wherever it is used.
Above ground static water tanks
Above ground static tanks hold from 5,600 to 25,000 litres and are the standard choice for a compound, yard or farm that needs a reserve of water on hand. The smaller static water tanks suit a small compound or a single set of welfare cabins, and a mid-sized tank is the usual step up where several outlets draw on the same supply. On long programmes and at commercial or agricultural premises, the largest static water tanks cut the number of tanker refills needed to keep the site supplied, and they hold bulk reserves for irrigation and process water.
WRAS approved potable water tanks
WRAS approved potable water tanks are made for storing drinking water. They are the choice where a tank feeds taps, kitchens or showers in welfare facilities. The polyethylene is UV stabilised for industrial settings and exposed weather, and the tanks are used on commercial and agricultural premises as well as site compounds.
Industrial water tanks
Industrial water tanks are non-potable tanks for commercial use, wash-down and agricultural rainwater harvesting. They are frost-proof, so they can stand outdoors through winter without cracking. They are the tank to choose for bulk non-potable storage on an open yard or field.
Insulated water tanks
Insulated water tanks have a double wall with multilayered foil insulation built in. They hold potable or non-potable water through hot or cold weather. Because the insulation is part of the tank, there is no separate insulation kit to fit outdoors or to deteriorate over time. They are an alternative to insulated GRP tanks where a supply has to keep running on an exposed site in a hard winter or in full summer sun.
Underground water tanks
Underground potable water tanks are moulded from WRAS approved MDPE that meets BS 6920-1, the standard for non-metallic materials in contact with drinking water. They store drinking water below ground on commercial, domestic and agricultural sites. Choose one for a permanent installation where the surface is needed for other uses or the tank should be out of sight.
Stackable drinking water tanks
Stackable drinking water tanks are portable tanks for storing and distributing emergency drinking water. They can be manoeuvred into position and stacked, so a reserve takes up little floor space until it is needed.
Baffled bowser water tanks
Baffled bowser water tanks carry water in the back of a car or van. The baffles moulded into the tank reduce surge as the vehicle brakes and corners. A bottom outlet takes a pressure washer, ball valve or brass tap, so the same tank carries the water and supplies it at the point of use. They suit mobile cleaning, small works and topping up equipment between sites.
Brine tanks
Brine is a solution of salt and water that is heavier than water. Brine tanks are moulded with extra thick MDPE walls to carry that weight. A standard water tank is the wrong purchase for brine, because its walls are built for the weight of water. Tanks for fuels and other liquids are in the other storage tanks range, and chemicals belong in chemical and hazardous substance storage.

Potable or non-potable water tanks
A potable tank is the right choice wherever people will drink the water, wash with it or use it in welfare facilities. It is moulded from material approved for contact with drinking water. A non-potable tank is for water nobody drinks, such as dust suppression, wash-down, rainwater collection, irrigation and process water in manufacturing and farming.
Most static sizes in the range are made in both versions, so the decision is made tank by tank. A site can run a potable tank for its welfare cabins beside a larger non-potable tank for its plant and haul roads. The insulated tanks also come in both versions. The industrial tanks are non-potable only, and the WRAS approved and underground tanks are potable only.
Once a tank has held non-potable water, it should not be put back into drinking water service. A tank bought for one purpose stays on that work for its life, so the version is worth settling before the order is placed.
Water tanks for construction sites, events and farms
Welfare units and drinking water
Welfare cabins, toilet blocks and shower trailers draw water every working day. The supply has to be potable and large enough to last the workforce between refills. A WRAS approved tank on the compound is a fixed supply, and an insulated potable tank keeps it running where the cabins sit on an exposed site through winter. Some welfare units move along a route with the work. For these, a towable bowser for welfare units carries drinking water to them and is towed back to a filling point when empty.
Dust suppression and wash-down
Dust suppression on haul roads, demolition and cutting work uses large volumes of water that nobody drinks. A large non-potable or industrial tank at the compound is the economical store for it. Bowsers fill from that tank and carry water to the work face, and the same tank supplies hoses for wheel cleaning, plant wash-down and pressure washing. A tank placed near the site entrance shortens every refill run and keeps bowsers off the working areas.
Events and emergency drinking water
Festivals, sports grounds and temporary venues need drinking water put out quickly at several points and protected from misuse, and so does a community during a mains supply outage. Stackable drinking water tanks are the right format for this. Their multiple lockable taps let staff control when and where water is drawn, and one tank serves several people at once. When an event runs over several days, towable bowsers bring further drinking water in from a filling point.
Rainwater harvesting and irrigation
Rainwater collection, farming, horticulture and landscape gardening run on non-potable water. The static and industrial tanks collect run-off from roofs and hold irrigation water for fields, nurseries and planting schemes. A harvesting tank is sized to the roof area that feeds it and the dry spell it has to bridge, and it is placed so the downpipes fill it by gravity. Parks, garden centres, roadside planting and other green spaces often have no mains connection. There, a flower watering bowser takes the water to the plants.

Water bowsers and pumps
Towable highway bowsers
A towable bowser is the right format where water is needed at several locations or along a road. The highway water bowser has a galvanised tubular steel chassis and heavy duty running gear. Its baffled tank keeps the load stable in transit, and it comes as a standard bowser or with a pump. Most of the highway range is listed with a choice of ball hitch or ring eye hitch, so a bowser can be matched to the towing vehicles already on the fleet.
Site and pressure washer bowsers
Site water bowsers are towable bowsers for domestic and commercial work sites. They are used for carrying water, dust suppression, plant watering and pressure washing. The pressure washer bowser carries a polyethylene water tank on a trailer set up for portable pressure washing where a fixed water supply is hard to reach. It is used in construction, farming, facilities management and roadworks.
Booster and submersible pumps
Water stored at ground level often has to reach outlets above the tank or some distance from it. A booster pump raises or maintains the pressure on that line. It is self-priming, with a stainless steel body that resists corrosion and rust. The submersible water pump works fully submerged in the water it moves. It is used for draining, for example to lower groundwater in an excavation or to clear wastewater.
Water tank sizes, bases and outlets
Sizing a tank to the job
The right capacity is the daily draw multiplied by the number of days between refills, with a margin for hot weather, extra staff or a late tanker. The range runs from 710 litre bowser tanks to 25,000 litre static tanks. On a tight compound, two smaller tanks linked together can be easier to place than one large one. Where water has to be moved by forklift or pallet truck, IBC water tanks in the Drums & IBCs range are the usual format.
Bases, access and delivery
A static tank needs a level, load-bearing base, such as a concrete slab or compacted and levelled hardcore, that can carry the tank when it is full. For the larger sizes, that weight runs to many tonnes. An uneven or soft base puts stress on the tank walls and outlets as the tank fills. Before delivery, confirm that the vehicle can reach the base, that gateways are wide enough and that there are no overhead lines above the offloading area. Underground tanks need the excavation, base and backfill material ready before the tank arrives, with the dig planned around the ground conditions and the water table.
Outlets and linking tanks
Several static sizes are listed with a choice of a standard or a larger outlet. The larger outlet suits faster draw-off to bowsers, pumps and wash-down hoses. A threaded outlet takes a tap, ball valve or hose connector, so one tank can run a standpipe at the compound and fill bowsers through a hose. Linking several tanks through their outlets builds a larger store from units that are easier to deliver and position. Tanks linked this way sit at the same level so the water balances between them.

Popular Categories

Stillages, Bins & Cages
View Products >

Drums & IBCs
View Products >

Wire Mesh Pallet Cages
View Products >
Frequently Asked Questions
What does WRAS approved mean for a water tank?
WRAS is the Water Regulations Advisory Scheme, which approves products and materials that meet the requirements for contact with drinking water. A WRAS approved tank is made from material shown not to affect the quality of the water stored in it. The approval covers the tank, so the fittings, pipework and connections on a drinking water supply also need to be suitable for potable use.
Can harvested rainwater be used for drinking?
Harvested rainwater is non-potable as collected, because it picks up debris and contamination from roofs, gutters and downpipes. It is used for toilet flushing, irrigation, wash-down and dust suppression. Making it drinkable needs filtration and disinfection beyond the tank itself. A harvesting system should be kept completely separate from any drinking water supply.
Can an IBC be used for water storage?
An IBC can hold water and is a common choice for smaller volumes that need to be moved by forklift or pallet truck. For drinking water, the IBC has to be clean and suitable for potable use. HERMEQ supplies IBCs in its Drums & IBCs range. For larger fixed volumes, or drinking water feeding welfare facilities, a static water storage tank is the better fit.
Do water tanks come with a pump?
The static tanks in the range are listed with an outlet and draw off by gravity. Where water has to reach outlets above the tank or far from it, a pump is added. The highway water bowser can be ordered with a pump. Booster and submersible pumps are available alongside the tanks.
How do you stop algae growing in a water tank?
Algae needs light to grow, so an opaque tank with its lid kept closed is the first defence. The industrial and brine tanks in the range are made from opaque plastic for this reason. Placing the tank out of direct sun and keeping leaves and debris out of the inlet both slow growth. Using the water regularly and cleaning the tank between uses help as well.
Can water tanks be used indoors?
Several static tanks in the range are listed for internal or external use, and each product page states where its tank can stand. Indoors, the floor has to carry the full weight of the stored water. The tank also needs a clear route in through doors and corridors, so measure that route against the tank dimensions on the product page before ordering.










































































































































