Ramps

HERMEQ supplies ramps for temporary and semi-permanent access on construction sites, industrial premises, roadworks and events. Several are manufactured in the UK, with steel processed and powder coated in-house. The range carries pedestrians, wheelchairs and trolleys over kerbs and thresholds, pallet trucks and forklifts into containers and vehicles, and plant and HGVs over level changes and exposed pipework.

It covers kerb and wheelchair ramps, threshold and building ramps, van and truck loading ramps, container ramps, mobile forklift yard ramps, and modular and temporary ramps for plant. Every ramp can be bought online, with next day delivery on stocked lines.

18 Items

Set Descending Direction
per page

Kerb ramps, loading ramps and construction ramps

The first choice across the range is what will cross the ramp, from pedestrians, wheelchairs and trolleys at a kerb up to 44 tonne HGVs over exposed services.

Kerb ramps and wheelchair kerb ramps

Plastic kerb ramps bridge the step between carriageway and footway wherever people, trolleys or wheelchairs have to leave or rejoin the pavement. The kerb access ramp is the compact choice for trolleys, wheelchairs and light vehicles, and is small enough to carry in numbers in a site van. For footway routes used by wheelchairs and mobility scooters, the Right Ramp wheelchair kerb ramp and the portable wheelchair ramp are wider units with an even slope across the kerb.

Threshold and step ramps

Doorways, single steps and low platforms are crossed with a threshold or step ramp. The adjustable metal threshold ramp is powder-coated steel and adjusts in height, so one unit covers thresholds that are not all the same. The lightweight building ramp is aluminium with grooved treads for a single step, and one person can place it and lift it away.

Van and truck loading ramps

Loading ramps take wheeled equipment, pallet trucks and crates from the ground onto a vehicle bed. The folding van ramp is fitted to the van and lowered with gas strut assistance, so one person controls it on removals, deliveries and equipment rounds. The truck loading ramp is longer and wider for higher beds and heavier loads, and rests on the vehicle bed with no bolting.

Modular and temporary ramps for plant and HGVs

Plastic construction ramps carry machinery over level changes and services where a timber or asphalt ramp would otherwise be built and later broken out. The modular ramp for plant and MEWPs is laid in sections to bridge steps, kerbs and ledges for pallet trucks, access platforms and construction equipment, and one person can install it. The temporary HGV ramp over pipes takes heavy goods vehicles across pipework and cables lying exposed at ground level on utility and telecom works, in place of cold patch asphalt.

Aluminium gangway ramps

Aluminium gangway ramps carry foot traffic between dry land and docks. They are made from marine-grade aluminium for corrosion resistance at the waterside, with a slip-resistant surface for decks that are often wet. They suit fixed waterside access that stays in place for long periods.

Plastic kerb ramp with chevron anti-slip surface placed against a kerb at a pedestrian route
Flat Top Container Ramp – 2100mm

Container ramps for pallet trucks and forklifts

The right container ramp depends on whether a pallet truck or a forklift moves the load, and whether the container stands on the ground or on a trailer bed.

Flat top container ramp for pallet trucks

For a container standing on level ground and loaded by pallet truck, the aluminium flat top container ramp is the right choice. Its flat top rests on the edge of the container floor, it comes in two load ratings, and integrated handles let it be moved from one container door to the next. It is sized for the low floor height of a ground-level container, and forklift traffic goes to the steel ramp below.

Steel shipping container ramp for forklifts

Forklift loading needs the shipping container ramp for forklifts, a steel ramp with a chequer plate surface that gives the truck a structured route into 10ft, 20ft and 40ft containers at ground level. It replaces timber decks and makeshift slopes in yards, depots and on construction sites that take regular container deliveries.

Mobile forklift ramps for trailers and containers

Where containers or trailers sit at bed height and the site has no loading dock, the mobile forklift ramp gives a forklift a drive-on route from the ground to the bed. It is a steel yard ramp, tested to Lloyd's British standards, with hydraulic height adjustment to match the bed and a balanced frame that is repositioned to wherever the next trailer is parked. Three models cover different forklift weights and working heights.

Ramps for portable buildings, roadworks and construction sites

Each job sets a different limit on the ramp, from the door height of a cabin to the width a wheelchair needs at a diversion.

Portable buildings and site cabins

Cabin and welfare unit doors are usually one step above the ground, and that step height differs from one unit to the next once the cabins have been levelled on packers. The lightweight building ramp covers a single step at a cabin door, while the adjustable threshold ramp is the better choice across a compound where door heights vary, because one ramp is reset for each door. Where a cabin sits higher or the ground falls away, modular ramp sections bridge the larger rise. The foot of the ramp has to land on firm, level ground, and on a soft compound ground protection mats give it that base.

Roadworks and pedestrian diversions

On street works, kerb ramps go where the signed pedestrian diversion leaves the footway and again where it returns, so a wheelchair, buggy or mobility scooter can follow the whole route without meeting an unramped kerb. Where the diversion passes an open excavation, the walkway continues over trench covers or pedestrian bridges and site stairs.

Live construction sites

Access on an active site changes as levels are built up, slabs are poured and plant routes move, so ramps that are placed and lifted by hand are reconfigured as the work progresses. Modular sections are added or taken away as a ledge grows or a kerb line is formed, and the temporary HGV ramp moves along a service run as pipework is exposed and reinstated.

Kerb Access Ramp
Right Ramp - Wheelchair Kerb Ramp

Ramp height, load rating and material

Measuring the rise and the usable width

The rise is measured from the ground where the ramp foot will sit to the top of the step, kerb, threshold or vehicle bed, and the ramp you choose has to have a working height that covers it. Usable width counts as much as length: on loading ramps it is narrower than the overall width because of the side edges, so compare it with the widest wheelbase, pallet truck or mobility aid that will use the ramp. The load rating has to cover the truck or vehicle and its load together.

Aluminium, steel or plastic ramps

Aluminium is used for ramps that are lifted and carried by hand, including the building, van, truck and flat top container ramps, where a lighter ramp means less manual handling. Steel is used for forklift duty in the container and mobile yard ramps, and for the threshold ramp, where powder coating adds corrosion protection and high visibility. Plastic suits kerb ramps, modular sections and pipe-crossing ramps, which are put down and taken up often, sit on paving without marking it and can be recycled at the end of their working life.

Rest-on or secured ramps

Most ramps in the range rest on the step, kerb or bed under their own weight and need no fixing, which suits access that moves daily. A ramp that takes powered traffic or stays in place for long periods is secured: the temporary HGV ramp has anchor points for flat, rigid ground, modular sections can be bolted to a step or ledge, and the steel container ramp takes optional chains with D shackles.


Frequently Asked Questions

Are kerb ramps legal to use on the road?

Kerb ramps are used on the public highway as part of signed and guarded street works, where they keep a pedestrian diversion open to wheelchairs and buggies. Outside works, the highway authority decides what can be placed in the carriageway, so a ramp left at a kerb for private use needs its permission. On private land such as a site, depot or car park, the landowner decides.

Can kerb ramps be used for cars?

The kerb access ramp takes light vehicles as well as trolleys and wheelchairs, so it suits car access over a kerb on a site, depot or private road. The Right Ramp and the portable wheelchair ramp are designed for pedestrians, wheelchairs and mobility scooters, and are the right choice for footway diversions.

Can a ramp be used over an open trench?

A ramp needs solid ground under its full length, so it is not used to span an open trench. The temporary HGV ramp is designed for pipes and cables lying exposed at ground level. To take vehicles across an open excavation, use road plates, and for pedestrians use trench covers or a pedestrian bridge.

Can ramps be made to a bespoke size?

HERMEQ alloy ramps can be made to order where a standard length or width does not suit the vehicle or the rise. Aluminium gangway ramps are specified for each location, with a site survey, a quotation, installation and compliance checks.

Can site ramps be left outside or in place long term?

The site ramps in the range are made for outdoor use, with slip-resistant aluminium, steel and plastic surfaces that grip in wet and muddy conditions. The powder-coated threshold ramp suits indoor and outdoor use year-round.

How are ramps stored and moved between jobs?

Plastic kerb and wheelchair ramps are light enough for one person to lift, with integrated handles on the kerb access ramp and the portable wheelchair ramp, which also stacks for storage in a van or on a pallet. The folding van ramp stays in the vehicle and folds upright to leave the floor clear.