Telehandler Attachments

HERMEQ supplies telehandler attachments for moving materials safely and efficiently on construction, infrastructure and event sites. The range handles bulk materials, waste and awkward loads that a bare set of forks cannot. Buckets and muck grabs move loose material, and tipping skips and a skip compactor deal with site waste. Telehandler lifting attachments, such as hooks, jibs and bag carriers, take suspended loads. Every attachment can be bought online with nationwide delivery.

Items 1-24 of 25

Set Descending Direction
  1. Fork Extensions
    Fork Extensions - 150 x 60 - Heavy Duty

    Quick 5 Day Delivery

  2. Telehandler Buckets
    Telehandler Buckets

    Quick 5 Day Delivery

  3. Telehandler Muck Grab
    Telehandler Grabs

    Quick 5 Day Delivery

  4. Rim Grip
    Rim Grip Drum Lifter

    Quick 5 Day Delivery

Page
per page

Fork mounted and bracket mounted telehandler attachments

Most of the range is fork mounted. The attachment slides over the forks already on the telehandler, so fitting it needs no carriage change. Because it locates on the forks, a fork mounted attachment is chosen by fork section and fork length, not by the make of machine. The same unit can therefore move between telescopic handlers of different makes on a mixed fleet.

Telehandler buckets are the exception. They mount directly to the carriage on a bracket for the machine, and HERMEQ supplies the bracket with the bucket.

Fork mounted attachments are the right choice where one machine moves between several jobs in a day. A bracket mounted bucket is the right choice where the telehandler spends long shifts loading, stockpiling or spreading loose material.

Fork mounted tipping skip and bracket mounted bucket beside a telehandler on a construction site
Telehandler Buckets

Buckets, grabs and skips for loose material and waste

The material decides the attachment. Free-flowing material suits a bucket, material that knits together suits a grab, and mixed waste from around the building suits a skip.

Telehandler buckets

A bucket loads, carries and tips loose aggregate, sand, topsoil and spoil, whether into lorries, onto stockpiles or along a run for spreading. The telehandler buckets come in a choice of widths and capacities. For dense material such as wet spoil or crushed stone, a smaller bucket keeps a full load within the machine's rating.

Telehandler muck grabs

A grab holds material that a bucket would spill or could not fill evenly, such as manure, straw, brash, hedge and tree cuttings, and bulky demolition timber. Choose one of the telehandler muck grabs where the load is fibrous or tangled and has to be lifted high to tip over the side of a skip or trailer.

Tipping skips for telehandlers

A tipping skip collects mixed site waste at the point of work and empties it into a larger skip or container, so waste is not barrowed across the site. The auto lock telehandler tipping skip tips from the cab, and the driver stays in the machine throughout. The tipping skip on castors can also be wheeled by hand between work areas when it is off the forks. The full choice of capacities and finishes is on the tipping skips page.

Skip compactor

The skip compactor presses down the general and bulky waste already in a skip and takes out the air space, so each skip holds more before it is collected. It suits demolition, strip-out and refurbishment work, where loose bulky waste fills a skip long before the skip reaches its weight limit.

Wheelie bin lifters and stackers

The wheelie bin lifter raises a full wheelie bin and empties it into a skip or larger container, so nobody has to lift and tip bins by hand. The wheelie bin stacker moves stacks of empty bins, or a single large four wheeled bin.

Telehandler lifting attachments

A lifting attachment suspends the load below a hook, whereas a handling attachment carries it on the forks or inside the attachment.

Fork mounted lifting hooks

A fork mounted lifting hook turns the telehandler into a simple crane for unpalletised loads that forks cannot pick up. It is used with the chains, slings and shackles in our lifting and lashing accessories range.

Telehandler jibs and crane attachments

A jib adds reach and a choice of hook positions, and the range lifts loads of up to 5,000 kg. The articulated extendable jib adjusts in length and angle. It is the one for tall or awkward loads and for lifts that must be made at an angle. The low profile extending jib extends its boom to reach over walls, trenches and stacked materials and to place a load precisely. The low profile jib is a fixed length jib with several load centres and a swivel hook, for tight spaces and low headroom. Both low profile jibs are for vertical lifts only, so any lift that needs an angle belongs on the articulated jib.

Bulk bag and sand bag carriers

Both carriers lift a filled bag by all four loops, so the bag hangs level and the loops share the load. The bulk bag carrier mounts straight onto the forks. The sand bag carrier is a frame hung from a fork mounted hook.

Materials lifting cage

The materials lifting cage holds small loose items, such as tool bags, fittings and brackets, while they are lifted between levels. Its mesh sides stop parts falling from the load.

Well ring lifter

The well ring lifter grips a concrete chamber ring with automatic serrated pads and lowers it into the excavation without slings. It suits sewer, drainage and utility chamber installation, where rings are set one on another to a line.

Lifting Hook - 1 Tonne
Fork Extensions (Max Fork 100 x 50)

Fork extensions, drum handlers and site cleaning attachments

Fork extensions

Fork extensions slide over the parent forks to carry long or bulky loads that overhang standard forks, such as timber packs, pipe bundles and long pallets. The range has fork extensions for 100 x 50 forks and fork extensions for 150 x 60 forks. For 150 x 60 forks that carry heavy long loads every day, choose the heavy duty fork extensions.

Drum lifters, tilters and rim grips

For steel and plastic drums, the choice depends on what happens to the drum. The drum lifter lifts and carries drums upright, one or two at a time. The rim grip drum lifter takes hold of the drum rim automatically, for frequent moves of one or two drums. Where the contents have to be poured or decanted, the fork lift drum tilter tilts the drum on the forks. The crane drum tilter tilts it while it is suspended.

Sweeper collector and fork magnet

The sweeper collector sweeps debris from yards, haul roads and hardstanding, collects it and dumps it into a skip. The fork mounted magnet picks up nails, screws and steel offcuts that puncture tyres and injure feet.

Checks before fitting a telehandler attachment

Fork section and fork length

Measure the width and thickness of the forks on the telehandler. Compare that section with the maximum fork size the attachment's pockets take, because forks that are too large will not enter, and forks much smaller than the pockets leave the attachment free to move. Check fork length as well: the forks need to reach far enough into the pockets for the retaining pin or clamp to engage.

Rated capacity with the attachment fitted

An attachment adds its own weight and moves the load centre further from the carriage, so the telehandler can lift less with it fitted than on bare forks. Work from the combined weight of attachment and load at the load's centre of gravity. Read that figure against the machine's load chart for the attachment, or against the manufacturer's chart for suspended loads when a hook or jib is fitted. On a jib, capacity falls as the hook point moves out along it, and boom extension and angle reduce it further.

Thorough examination of lifting attachments

Hooks, jibs, bag carriers, the lifting cage and the well ring lifter are lifting accessories. LOLER requires each one to have a thorough examination by a competent person at least every six months, with the report kept on record. HERMEQ lifting attachments are certified for six months from the date of manufacture, and the user arranges the next examination from that date. Handling attachments such as buckets, grabs and skips are covered by the operator's pre-use checks and the inspection regime for the machine.

Telehandler Grabs

Frequently Asked Questions

Can forklift attachments be used on a telehandler?

Many can, provided the telehandler's forks fit the attachment's pockets and the machine can carry the attachment with its load. Several units in this range are made to suit both machines, including the lifting hook, the low profile jibs and the skip compactor.

How are fork mounted attachments held on the forks?

Most are retained by heel pins that drop in behind the heel of each fork, or by thumbscrews that clamp onto the fork blades. The auto lock tipping skips use a gas strut mechanism that locks onto the forks without the driver leaving the cab.

Is lifting with a telehandler jib a planned lifting operation?

Yes. Under LOLER, every lifting operation must be planned by a competent person, supervised appropriately and carried out safely. The plan covers the weight and centre of gravity of the load, the slinging method, the route, the ground conditions and an exclusion zone below the suspended load, and it uses the machine's load chart for suspended loads.

Are HERMEQ telehandler attachments made in the UK?

Yes. HERMEQ manufactures the range in the UK and processes its own steel in house. Some attachments, such as the tipping skip on castors, are built to order.

Can attachments be supplied in a fleet colour?

Tipping skips for telehandlers come in a choice of standard colours, and custom RAL colours can be requested to match a fleet or company livery. The low profile jibs, the skip compactor and the wheelie bin lifter are finished in bright orange, so they stand out on a busy site.