Lifting Equipment
HERMEQ construction lifting equipment moves heavy and awkward materials, waste and wet concrete around building sites on a crane hook, on forklift or telehandler forks, or on an excavator. The range covers crane skips, goods and gas bottle cages, crane forks and block grabs, kerb stone lifters, jibs and drum handling equipment. Crane pallet forks and self-levelling crane forks carry palletised bricks and blocks, so the crane that lifts steel and formwork also lands materials where the bricklayers need them.
HERMEQ manufactures in the UK, with in-house steel processing and powder coating. Next day delivery is available on many items.
Construction lifting equipment: skips, cages, forks and lifters
The load decides the type: waste and wet concrete go in skips, goods that will not sit on a pallet go in cages, palletised bricks and blocks go on crane forks or in a grab, and single kerbs, slabs and steel plates go on a hand-held or hook-hung lifter.
Concrete skips and pouring buckets
A concrete skip is filled at ground level, lifted over the pour and opened to place wet concrete into shuttering, columns, trenches or slabs. Twinflow skips switch between bottom discharge for mass pours and side discharge for placing into formwork, while coneflow skips and lever-gate skips with a hose outlet give the controlled flow that narrow formwork needs. The full selection, from 500 to 2000 litres, is under concrete pouring skips, and the excavator concrete pouring bucket carries concrete on the excavator for foundations and road work.
Crane skips for muck and waste
The choice between waste skips comes down to how each one is emptied. The crane lifted boat skip and the self-dumping boat skip discharge automatically under the crane with no manual tipping, and the circular tipping skip tips and empties itself once its safety lock is released by hand, which suits tight work zones. The drop bottom skip releases its load through the base from either a crane or a forklift, and the bottom empty skip opens its base when it is lowered onto a larger yard skip, so the forklift driver never leaves the cab. Rubble cleared indoors goes into the wheeled rubble skip, which is pushed to the work and then crane-tipped into a site skip. The crane lift tipping skip takes general waste on its lifting lugs, and forklift versions are under tipping skips. Capacities across these skips run from 150 to 4000 litres.
Mortar skips and tubs
Mortar skips and tubs take mortar and small loads of waste up to bricklayers on the scaffold, and are sized to the gang they supply. The steel mortar skip lifts on a four-leg sling from its crane lugs and stacks when empty, while the UV-resistant plastic mortar tub is light and stacks in large numbers for storage and delivery.
Goods carrying cages and brick baskets
Mesh-sided goods carrying cages move loose fittings, tools, materials and debris that cannot be palletised, and the heavy duty goods cage with ramp adds a loading ramp for goods that are wheeled in at ground level. Where the contents must be locked away between lifts, the lockable forklift and crane lifting cage is a sheet steel crate with full-width doors and deadbolts. The brick basket hangs from a single crane lifting point and suits loose bricks and materials that would fall from open forks. Goods cages in the range are rated up to 3 tonnes.
Gas bottle, IBC and wheelie bin cages
Purpose-built cages hold one kind of awkward load in position for the lift. The gas bottle lifting cages carry cylinders by crane and double as a store on the working floor, and the gas bottle forklift support moves a single bottle on and off a forklift. The open IBC lifting cage houses an intermediate bulk container with lifting eyes at each corner, and the IBC tipper tilts the container so it drains fully. The wheelie bin crane cage lifts several 660 or 1100 litre bins in one overhead lift.
Access and rescue cages
The crane and forklift access cage lifts operatives to work at height, either on a fork truck or slung on chains under a crane. The crane rescue cage and the stretcher rescue cage each take a casualty on a stretcher with a first-aider beside them for evacuation from height, and the stretcher rescue cage has a door at each end so the first-aider can enter from either side.
Crane forks and block grabs
Crane forks carry pallets of bricks and blocks under the hook. The crane pallet forks balance themselves as the load is taken up and lift with safety nets around the pallet, and the telescopic self-levelling crane forks keep the tines level under packs of bricks. The block lifting grab lifts palletised bricks, slabs and paving blocks as one unit.
Kerb stone lifters and handles
Kerb lifters and stone handles clamp a single kerb, step, slab or block so it is carried and bedded by the handles. The manual kerb handle is the lightest tool for carrying kerbs by hand, and the two-person stone handle shares heavier stones between two operatives and is never used by one person alone. The kerb stone lifter works by hand or under a crane hoist and releases automatically when the stone is set down, while the crane kerb stone handle has a lifting ring for the heaviest stones. Ratings run from 150 to 500kg.
Magnetic lifters for steel road plates
A permanent magnetic lifter hangs from the hook and picks up steel plates and other ferrous loads without chains, lifting eyes or a power supply. It suits groundworks and civils crews who lay, lift and realign steel road plates many times over the course of a job. Sizes run up to 2000kg plate capacity.
Forklift jibs and roof truss jibs
A jib gives a forklift or telehandler a hook for loads that will not sit on forks. The fork mounted extendable jib adjusts in length and angle for tall and awkward loads, with versions rated up to 5 tonnes. The roof truss jib fits a quick hitch and carries trusses out to the wall plate for placing.
Drum lifters and tilters
Drum handling equipment moves plastic and steel drums without rolling or manhandling them. The rim grip drum lifter takes open and closed top drums by the rim automatically, and the forklift drum lifter comes in single and double versions. Where a drum has to be tipped as well as moved, the forklift drum tilter turns it under control, and the crane drum tilter does the same from a hook, worked by crank handle or looped chain.

Crane, forklift or excavator lifting equipment
The machine that makes the lift settles most of the choice, because each item is built to be picked up in one or more set ways. Crane-lifted items hang from the hook on a bale arm, on lifting lugs or eyes, or on a four-leg chain sling, and the self-tipping boat and circular skips are built for tower crane work. Fork-lifted items have fork pockets, fork channels or a fork mount. The bottom empty skip, the jibs and the drum handling equipment suit forklift yards, the roll cage and pallet lifter loads roll cages on and off articulated vehicles, and fork extensions lengthen the tines for longer loads. More fork-mounted equipment is listed under forklift attachments and telehandler attachments.
The goods carrying cages, the plastic mortar tub, the drop bottom skip, the access cage and the wheelie bin crane cage all take a crane hook and forklift tines. They are the choice when the lifting machine changes during a job, for example a telehandler during groundworks and a tower crane once the frame is up, because the same cage, tub or skip stays in use from start to finish.
On sites with no crane, the excavator already working there does the lifting. HERMEQ excavator pallet forks suit 8 to 20 tonne excavators, and together with the pouring bucket they let one machine unload pallets and place concrete.
Safe working loads, LOLER and lifting gear storage
Rated loads across the range
Lifting items in the range are rated from 150kg on a hand-held kerb handle to 8 tonnes on the largest boat skip. For skips and tubs, capacity in litres and safe working load are separate ratings, and dense loads such as wet concrete, earth and broken masonry reach the weight limit before the skip is full, so a skip is chosen by the weight of its heaviest likely load.
Test certificates and standards
Several items arrive with their paperwork. The gas bottle lifting cages are supplied with a LOLER certificate covering a six-month test, the wheelie bin crane cage comes with a Declaration of Conformity and a six-month LOLER certificate, and the crane lift tipping skip has LOLER certified lifting lugs. The magnetic lifter is certified to BS EN 13155, the standard for non-fixed load lifting attachments.
Storing slings, chains and rigging on site
A locked store keeps rigging together, dry and off the ground. The rigging storage cage is a lockable mesh cage in single and double widths that moves by crane or forklift, and the rigging storage locker is a padlock-ready, powder-coated locker with forklift pockets, so the store moves with the work. The slings and shackles that go in them are under chain slings and lifting accessories.

Popular Categories

Tipping Skips
View Products >

Forklift Attachments
View Products >

Telehandler Attachments
View Products >
Frequently Asked Questions
How often does lifting equipment need a thorough examination?
Under the Lifting Operations and Lifting Equipment Regulations 1998 (LOLER), lifting accessories and any equipment used to lift people need a thorough examination at least every six months, and other lifting equipment at least every 12 months. A written scheme of examination drawn up by a competent person can set different intervals. A thorough examination is also needed after anything that could affect the item's safety, such as damage or a long period out of use.
What is the difference between SWL and WLL?
The working load limit (WLL) is the maximum load the manufacturer rates an item to lift in general service. The safe working load (SWL) is the load allowed for a particular use, and it can be lower than the WLL when conditions such as sling angle reduce what the item can safely carry. Most listings in this range quote SWL, and the load lifted never exceeds it.
Can a goods carrying cage be used to lift people?
No. Goods carrying cages, brick baskets and cages for gas bottles, IBCs or bins are rated for goods only, and people are lifted only in equipment built for that purpose. In this range that is the crane and forklift access cage for work at height, and the two accident rescue cages for a casualty on a stretcher with a first-aider. Any lift of people is planned separately by a competent person.
What should be checked before each lift?
The slinger or operator confirms that the item's rated load is marked and covers the load, and that its examination record or tag is in date. Lifting lugs, bale arms, eyes and fork pockets are checked for cracks, distortion and wear, and pins, locks, gates and doors are checked to be in place and closed. On kerb lifters and stone handles, the rubber jaws and the jaw width setting are checked before each stone, and every load is placed evenly and secured so nothing can fall during the lift.
Can lifting cages and skips be painted in company colours?
Yes. HERMEQ has in-house powder coating, the gas bottle lifting cages are listed with an optional corporate paint finish, and the crane lift tipping skip is already listed in more than one colour.










































































































































