On-Ground Fencing

HERMEQ temporary security fencing secures the perimeters of construction sites, infrastructure compounds, events and commercial facilities. Every system stands on its own bases and needs no foundations, digging or drilling, so it suits sites where the ground cannot be broken or the boundary will change. The range runs from rapid deployment V mesh and rigid double wire panels to LPS 1175 rated fencing and monitored mesh with tamper alerts. Each system has the height and rigidity of a permanent security fence, and the line can still be relocated or reconfigured as the site changes. HERMEQ holds permanent UK stock for next day delivery.

5 Items

Set Descending Direction
  1. Safe Mesh On Ground Defence System
    Safe Mesh On Ground Defence System

    Quick 5 Day Delivery

  2. Temporary Security Fencing at HERMEQ.
    Rapid Deployment Fencing

    Quick 5 Day Delivery

  3. Double Wire Temporary Fencing from HERMEQ.
    On Ground Security Fencing

    Quick 5 Day Delivery

  4. Security Rated Temporary Fencing System from HERMEQ.
    High Security Temporary Fencing

    Quick 5 Day Delivery

  5. Temporary Mesh Pulse Fencing from HERMEQ.
    Temporary Mesh Pulse Fencing

    Quick 5 Day Delivery

per page

Temporary security fencing panels and systems

The range climbs in security from open V mesh perimeter fencing, through rigid double wire and block-based systems for taller and longer-standing lines, to LPS 1175 rated fencing for proven intrusion delay and monitored fencing that reports an attack as it happens.

Rapid deployment V mesh fencing

Rapid deployment fencing is the general perimeter system in the range, sold in the trade as V mesh or profile mesh security fencing. Its panels stand in low-profile anti-trip bases that need no excavation, so a long line can go up quickly beside footpaths, rail compounds and public areas without creating a trip hazard. The bases are made from recycled material and the panels largely from recycled steel, which counts on projects that report embodied carbon.

Double wire on-ground security fencing

Double wire security fencing, which the trade also calls twin wire fencing, uses a rigid double wire mesh panel in standard and heavy duty versions. Choose it where a fence faces the public for months at a time and a straight, stiff line matters as much as security, as on site boundaries, schools, sports grounds and airports. The heavy duty version is the one to pick for exposed or higher-risk perimeters.

LPS 1175 high security temporary fencing

High security temporary fencing is the security rated system in the range, certified to LPS 1175 and built with anti-climb mesh, hidden fixings and a cantilever base that stands without foundations. Choose it for critical infrastructure, utilities and high-value compounds, or wherever a client, insurer or security adviser specifies a rated barrier.

Monitored mesh fencing with tamper alerts

Mesh Pulse monitored fencing adds sensors to a tall mesh panel, so the fence detects impact, movement or cutting and raises a tamper alert, with an optional alarm relay. Choose it for unattended compounds, such as remote utility, solar or storage sites, where nobody is on hand to see an attack and the fence itself has to report it. The pre-assembled units go in without fixings or groundwork.

V mesh on concrete block bases

The Safe Mesh on-ground defence system stands heavy V mesh panels in concrete block bases, so the weight of the block holds the line where nothing can be fixed into the ground. Choose it for semi permanent zones on hardstanding, car parks and regulated ground, and for lines that stay in one place for long periods but must remain removable.

Run of V mesh temporary security fencing panels on anti-trip bases around a construction compound
Rapid Deployment Fencing

On-ground or in-ground perimeter fencing

On-ground fencing is the right choice wherever the ground cannot be dug or drilled, or the boundary will not stay where it is, while fencing set in the ground belongs on a boundary that is fixed for the life of the site.

That makes on ground fencing the standard answer on rail and utility land, where excavation is controlled and buried services are a risk, on hardstanding and finished surfaces that cannot be broken, and on leased or licensed land that has to be handed back unmarked. It also suits phased projects, where the compound grows or shifts as the work moves on. Left in place for months or years, it is usually called semi permanent fencing, because it does the job of a permanent security fence for the length of the project without any foundations.

Where the boundary is permanent, as at a depot, substation or school that will keep its fence, posts set in concrete give the fixed line it needs. HERMEQ supplies permanent V mesh perimeter fencing for secure boundaries that keep sightlines open, and palisade fencing where steel pales are preferred.

Perimeter security fencing for building sites and infrastructure

Construction site perimeters

A building site boundary has to keep the public out of a dangerous area and stop the theft of plant and materials, and on most sites it runs alongside a footpath or road. The base matters as much as the panel there: low-profile anti-trip bases keep the footway safe, and a line that faces the street for the whole build needs the height and rigidity to resist climbing and leaning. Vehicle and pedestrian site gates are planned into the run where deliveries and the workforce enter.

Rail, utility and logistics compounds

Rail, utility and logistics compounds often stand unattended overnight with cable, fuel and plant inside, which makes intrusion delay worth specifying, and at remote locations tamper monitoring as well.

Renewable energy and defence sites

Solar farms, battery storage and defence sites cover large areas of open ground, often far from a manned gate. The perimeter is long, fully exposed to the weather and usually needs to be tall and hard to climb, and where the asset owner or client requires a rated barrier, LPS 1175 fencing is the type to specify.

Events and high footfall public areas

At events, transport hubs and busy public spaces, the fence controls crowds as well as closing off restricted areas. Large numbers of people walk along the line, so anti-trip bases matter more here than anywhere else.

Schools, sports grounds and airports

Schools, sports grounds and airports need a security fence that stays in place for a term, a season or a construction phase and still looks orderly to the public. A rigid double wire panel holds a straight, tidy line, and at airports the fence also has to stand on hardstanding without breaking the surface.

On Ground Security Fencing
High Security Temporary Fencing

Heras, anti-climb and security rated fencing

Heras panels or security fencing

Standard Heras fencing panels are the right fence for a general site boundary: they are quick to put up, easy to move and enough to mark the line and deter casual entry. Step up to a security system when the site holds plant, materials or infrastructure worth targeting, stands unattended, faces a known threat or needs a taller and stiffer line than a mesh panel in a fence foot can give. HERMEQ's full temporary fencing range covers both.

Security rating and LPS 1175

LPS 1175 is the Loss Prevention Standard issued by the Loss Prevention Certification Board, which rates a barrier by how long it resists a timed attack with a defined set of tools. A certified fence has been tested against that attack, and an unrated fence, however strong, cannot be put forward where a specification calls for an LPS 1175 rating. In this range, the high security temporary fencing system carries the certification.

Fence height

Panel heights across the range run from about 1.2m to 3m. Low panels suit segregation inside a site and around crowds, where people need to see over the line. Perimeters facing a road or open land call for taller panels, and the tallest heights belong on high-risk compounds, rail and utility sites and anywhere holding high-value plant.

Wind exposure and base type

The systems are tested to BS EN 1991 for wind loading, and the rapid deployment, double wire and high security systems are proven in winds over 100mph. A standard Heras line on the same exposed site, especially one carrying sheeting or banners, depends on added concrete ballast blocks, stabilisers from the temporary fencing accessories range and a temporary works design. Choose anti-trip bases where people walk along the line, cantilever bases where the fence must stand on any surface without tools, and concrete blocks for long-standing lines on hardstanding.

Visibility and surveillance

Open mesh keeps CCTV coverage and inspection sightlines across the whole compound, so cameras, patrols and passers-by can see what happens inside, and fewer blind spots make the site risk assessment simpler. Steel site hoarding screens the site completely, which suits work that needs privacy, noise screening or advertising space, and leaves the inside of the line out of view.


Frequently Asked Questions

Does temporary security fencing need a temporary works design?

On a managed construction site, a fence line normally falls under the temporary works procedure, and the temporary works coordinator decides whether a design or wind load calculation is needed. Sheeted lines and exposed locations are the usual triggers. For the systems in this range, the wind load testing already carried out gives the designer a tested basis to work from.

Is temporary security fencing anti-climb?

The high security temporary fencing system uses dedicated anti-climb mesh, and it is the system to choose where resistance to climbing is the priority. The other systems in the range use rigid double wire or V mesh panels that are stiffer and taller than standard site fencing. Pairing anti-climb mesh with one of the taller panel heights gives the strongest protection against scaling.

Can gates be added to a security fence line?

Yes. Swing and sliding gates can be built into the run so that vehicles and pedestrians enter only at controlled points. The gate should match the height and security level of the panels either side, because a lower or weaker gate becomes the easiest way through the perimeter.

How do you work out how many panels a perimeter needs?

Measure the full length of the line, including any internal segregation runs, divide it by the width of one panel of the chosen system and round up. Deduct the length taken by each gate, and add one extra base at the end of every separate run. Panel widths differ between systems, so take the width from the product page of the system you are buying.

Where is HERMEQ security fencing made?

The rapid deployment, double wire, high security and Mesh Pulse systems are manufactured in the UK. HERMEQ processes steel and applies powder coating in-house.