Sheeting
HERMEQ supplies scaffold sheeting for enclosing the scaffold face against weather, dust and noise. Standard sheeting is an economy grade for short-term, low-rise work. Clear sheeting is weather resistant LDPE for built-up urban areas where daylight needs to reach the building behind. Flame retardant sheeting is made from fire resistant LDPE and lasts around three months on site. Acoustic sheeting fits to the scaffold to reduce noise from the works. For branding, standard sheeting can be screen printed, and custom printed marketing sheeting carries full-colour designs across the scaffold. Every type is held in permanent UK stock with nationwide delivery.
-
Scaffolding Galvanised Steel Roofing Sheet – CorrugatedAs low as £14.51 £17.41Quick 5 Day Delivery
Standard, clear, flame retardant and acoustic scaffold sheeting
Each type answers a different demand on the scaffold face: low cost on a short job, daylight for the building behind, resistance to flame spread, noise control or advertising space.
Standard scaffold sheeting
The economy grade in the range is Monarflex Scaffband, made for low-rise, short-term work such as domestic refurbishments, municipal jobs and small commercial builds. Our standard scaffold sheeting is light enough for a small team to fit by hand without lifting equipment, and it holds up in light wind and moderate conditions on framed scaffold runs. Its surface takes screen printing, so a logo and contact details can go on a short job without the cost of a fully printed wrap.
Clear scaffold sheeting
Where the building behind the scaffold stays in use, a see-through sheet keeps natural light reaching its windows. Clear scaffold sheeting is the choice for occupied offices and flats under maintenance, schools and other education premises, and retail frontages that keep trading through the works. It screens the works from pedestrian routes on city-centre streets and gives weather protection at the same time.
Flame retardant scaffold sheeting
Fire retardant LDPE reduces the risk of flame spreading across the scaffold face, which is the reason to specify this grade wherever there is a source of ignition behind the sheet. Choose flame retardant scaffold sheeting for hot works, electrical installations, demolition and façade renovation, particularly in densely built areas where a fire on the scaffold would put neighbouring buildings at risk.
Acoustic scaffold sheeting
Noise from breaking out, cutting and drilling passes straight through an open scaffold, and an acoustic sheet on the face reduces the noise reaching homes, offices and other neighbours. Acoustic scaffold sheeting comes in two grades, so the sheeting can be matched to the noise reduction the project specification asks for, and it also fits around temporary site structures. Noise at ground level along the site boundary is a separate job, covered by the acoustic barriers range for fence lines.
Custom printed scaffold sheeting
A long build on a busy street is in public view for its whole programme, and a printed wrap puts the developer's or contractor's brand across the full height of the scaffold. Custom printed scaffold sheeting carries logos, colours and messages in full colour, for long-duration projects in commercial areas, scaffold wraps for brand promotion and perimeter branding on infrastructure work. The same printing is available for ground-level fencing as printed fence covers.

Debris netting, catch fans and scaffold roof sheets
Sheeting encloses the scaffold face, debris netting screens it while wind passes through, catch fans catch objects falling from height, and roof sheets cover the top, so a single scaffold often needs more than one of them.
Debris netting
An open knitted mesh of monofilament polyethylene holds back debris and dust without closing off the face. Debris netting is the right buy over sheeting where the scaffold or fence line needs screening but the face does not have to keep out the weather, as on general building work or along a site perimeter. Its eyelets fix straight to scaffold tube or to temporary mesh fencing, and the choice of colours makes it easy to mark out a work zone.
Scaffold catch fans
Wherever work at height sits over a pavement, road or neighbouring property, falling tools and debris are a risk to the people below, and a catch fan projecting from the edge stops them before they reach the ground. The mini scaffolding catch fan is a compact, lightweight unit that clips to the scaffold guardrail, for maintenance and smaller scaffolded works. The safety net catch fan mounts to slab, scaffold or wall edges without a crane and folds up to clear crane paths, for tight inner-city sites with little room for an exclusion zone at ground level. Both work alongside the edge protection that keeps operatives on the scaffold.
Corrugated scaffold roof sheets
The top of a scaffold needs a rigid cover where open works, stored materials or a walkway below must stay dry. Corrugated scaffold roof sheets are galvanised steel and form a temporary roof or weather cover when laid across a framework of scaffold tube and fittings, with each sheet overlapping the next along the corrugation.
Sheeting a scaffold: checks before you order
How long the sheeting stays up
Time on site decides the grade more than any other factor. Economy standard sheeting is made for short-term, low-rise work in calm conditions, flame retardant sheeting is made for jobs of around three months, and custom printed marketing sheeting lasts up to six months, which covers most long builds where the branding has to stay presentable. On a programme that runs longer than the sheeting's life, plan a change of sheeting part way through.
Roll width and coverage
Sheeting rolls across the range are 2m to 2.25m wide, close to the height of a standard scaffold lift, so one width normally covers one lift with the roll above overlapping it. Roll length varies by type, and the length of the scaffold run divided by the roll length, with an allowance for overlaps and corners, gives the number of rolls needed for each lift.
Wind loading on a sheeted scaffold
A sheeted scaffold catches far more wind than an open one, and that load passes through the ties into the building and down to the base plates. The scaffold design has to allow for sheeting before any goes on, with the tie pattern and bracing worked out for a sheeted face.
Fixing and overlapping joins
Ties go through the eyelets and reinforced bands at close, even spacing, using toggle ties, cable ties or scaffold straps, so the sheet stays taut against the scaffold. A taut face lasts longer, because a sheet that flaps wears through at its fixings. Where dust, water or blasting material must stay inside, overlap the joins between sheets and tape the overlaps for the tightest containment, as during water-jetting or sandblasting next to occupied buildings.

Popular Categories

Boards, Tube & Fittings
View Products >

Ladders & Stairways
View Products >

Scaffolding Storage
View Products >
Frequently Asked Questions
What is scaffold sheeting made from?
Scaffold sheeting is made from low density polyethylene (LDPE), a flexible plastic film. Reinforced bands run along its length for fixing it to the scaffold.
Is scaffold sheeting waterproof?
Scaffold sheeting is weather resistant, keeping rain and wind off the working platform and any open construction behind it. How well a whole sheeted face keeps water out depends on how tightly the sheet is fixed and how the joins between sheets are made.
Can scaffold sheeting be used inside a building?
Yes. Flame retardant scaffold sheeting also works as a temporary internal barrier or dust screen during staged works and phased refurbishments, separating the work area from occupied parts of the building. Its fire retardant material is the reason to choose it over standard sheeting for indoor use.
Which British standards cover scaffold sheeting?
Two British Standards apply. BS 7955 is the specification for containment nets and sheets on construction works, and the standard scaffold sheeting in the HERMEQ range conforms to it. BS 8410 is the code of practice for lightweight temporary cladding for weather protection and containment, and installation should follow it.
Is Monarflex the same as scaffold sheeting?
Monarflex is a brand of scaffold sheeting, and the trade often uses the name for any scaffold sheeting in the way other well-known brand names become generic. The standard scaffold sheeting in the HERMEQ range is Monarflex Scaffband, the economy grade in the Monarflex line.
What happens to scaffold sheeting after the job?
Sheeting comes down before the scaffold is struck, cut free from its ties and rolled or bundled for removal. It can then be disposed of, or recycled where local facilities and site rules permit. Stripping it in sections keeps loose sheet from catching the wind on the way down.










































































































































