Vehicle Height Restriction
HERMEQ height restriction barriers control access for high-sided vehicles in car parks, depots, work zones and temporary traffic management layouts. They keep vans and HGVs away from overhead structures, live cables and other low-clearance areas. The range covers made-to-spec steel car park height barriers and GS6 telescopic goal posts, all manufactured in the UK. The goal posts stand on metal or Metro bases or on water or concrete filled ballast blocks. They come as a full span with bunting or a solid crossbar, or as a cantilever arm set where only one side of the route has ground space.
Permanent and temporary height restriction barriers
The choice depends on how long the height limit has to stay. A permanent structure at an entrance calls for a steel barrier fixed in place, while an overhead hazard that comes and goes with the works calls for goal posts that can be moved and reset.
Fixed steel height barriers for car parks and depots
A fixed height restriction barrier is a steel frame of two uprights and a crossbeam, made to the width and clearance of one entrance and left in place for years. The same frame also closes service roads, industrial depots and retail service yards to vehicles above the set height. Choose it where the limit is a permanent part of the site and the barrier sees traffic every day.
Telescopic goal posts for overhead hazards
GS6 telescopic goal posts are a temporary height barrier made of two poles on weighted bases, which carry bunting or a solid crossbar at the safe height. The poles extend to over 7m, so one set covers most clearances met on site. Choose them for overhead cables, gantries and low structures on worksites, highways, rail track zones and demolition jobs. They suit work where the barrier has to follow the job, change height and come away when the work finishes. On site they are also called overhead cable goal posts, power line goal posts or height restriction goal posts.

Height barriers for car parks, depots and overhead cables
Underground and staff car parks
In an underground car park, the barrier keeps vans and HGVs away from beams, ducts and pipework that cars clear without difficulty. In a staff or gated car park, the same barrier lets cars in and out as normal and keeps unauthorised larger vehicles out.
Construction sites under overhead power lines
Goal posts for overhead power lines mark the safe passage beneath a live line. They show drivers of tipper lorries, excavators, cranes and concrete pumps where they can cross, and the height at which a raised body, boom or jib would come too close. Every route that plant takes under the line needs its own goal posts. The crossbar or bunting has to be in place before the first machine arrives.
Highways, rail track zones and demolition
On urban highways and industrial compounds, goal posts warn HGV drivers of overhead cables and gantries during works, and they have to stay upright in wind beside live traffic. Rail contractors use them where vehicles and plant work near overhead line equipment. Demolition sites use them where the overhead hazard changes as the structure comes down.
Height barrier clearance, bases and crossbars
A fixed barrier is specified once, at the time of ordering. A goal post set is built from bases and crossbars that can change from one job to the next.
Clearance height and span
Clearance comes from the lowest overhead point on the route past the barrier. This may be a beam, duct, light fitting or sprinkler pipe some way inside the entrance, and the crossbar sits below it with a margin. Span is the clear width between the kerbs, walls or posts on either side. Before ordering a fixed barrier, three things set the specification: the lowest overhead point, the opening width and whether taller authorised vehicles will ever need to pass. For overhead power lines, the safe height comes from the network operator that owns the line, and the telescopic poles are set to it on site.
Standard or heavy duty box section
The fixed barrier is made in standard or heavy duty steel box section. Standard section suits car parks used mainly by cars. Heavy duty section suits wider openings, and depots or service roads where large vehicles approach the barrier every day.
Bunting or solid crossbar
Bunting is a light visual warning line that goes up quickly, which suits short jobs and temporary crossings. A solid crossbar is a rigid line at a fixed height that drivers read as a barrier. It is the better choice on busy haul roads and highway works where the goal posts stay in one place for longer.
Bases, ballast blocks and the cantilever arm
Metal and Metro bases can be anchored, or weighted with sandbags, for short-term use. For exposed positions and longer deployments, goal post ballast blocks are filled with water or concrete. They are non-conductive for work near live electrical equipment and stack for storage. They also let the goal posts be repositioned without digging or fixing into the surface. Where only one side of the route has ground space for a base, a cantilever arm set uses a single pole with an arm reaching across the opening.

Height restriction barrier installation
Installation starts with position. The barrier has to stand far enough ahead of the hazard for a driver who cannot pass to stop and turn round without reversing into traffic. A fixed barrier goes at the entrance, before the first low point inside, with a turning space or another route for vehicles that are too tall.
Goal posts go on each approach to an overhead cable, on both sides of the line and set back from it, with the crossbar or bunting below the safe clearance. Between crossings, a run of road barriers alongside the line keeps plant away from it.
Advance warning signs go on the approach, at a point where drivers can still take another route. Use traffic signs for permanent sites, or quick fit signs on frames for temporary layouts.
Popular Categories

Road Barriers
View Products >

Water Filled Barriers
View Products >

Cones
View Products >
Frequently Asked Questions
What does GS6 mean on a height restriction barrier?
GS6 is the Health and Safety Executive guidance note on avoiding danger from overhead power lines. It sets out how to keep plant and vehicles away from live lines, including barriers along the line and goal posts at each crossing point. A GS6 height restriction barrier is a goal post system built for that layout, with bunting or a crossbar set below the safe clearance.
Can taller authorised vehicles get through a height restriction barrier?
Yes, where the barrier is made with opening leaves. The steel height restriction barrier can be specified with single or double leaves that lock open or closed with a latch and padlock. A keyholder can then swing the crossbar aside for a delivery or emergency vehicle and close it again afterwards. A fixed beam without leaves keeps the limit in place at all times.
What is the difference between a height barrier and a car park barrier?
A height barrier limits vehicles by height and lets anything lower drive under it without stopping. A car park barrier, such as a rising arm, controls whether any vehicle enters at all. Many car parks use both, with the height barrier ahead of the entrance so that high vehicles turn away before they reach the arm.
Why are some goal post poles blue and white?
Blue and white pole sets are an option for rail contractors. They make goal posts used in rail track zones distinct from the red and white sets used on roads and construction sites. Red and white is the standard finish, chosen for visibility to HGV drivers.
Are HERMEQ height restriction barriers made in the UK?
Yes. The steel height restriction barrier, the GS6 goal post system and the ballast block are all manufactured in the UK. HERMEQ processes and powder coats steel in house, so each permanent barrier is made to the span and clearance of its entrance and finished for visibility.










































































































































