Cone Lamps
HERMEQ supplies traffic cone lights for night work, low light and poor weather wherever temporary traffic management is in place. The lamps make cones, site perimeters and temporary pedestrian routes visible after dark, so that drivers and pedestrians can see the hazard and the way past it. Each lamp fits onto a standard road traffic cone and is ready for use as soon as it is mounted.
The range covers amber, red, blue and magenta warning lamps, sequential lamps for coning tapers on fast roads and a high intensity white lamp for lighting temporary signs. Lamps in stock go out with next day delivery.
Traffic cone lights for roads, sites and signs
The choice of lamp turns on two things: the directions from which the cone line is seen, and whether the light has to mark a hazard, guide drivers through a taper or make a sign readable at night. Every lamp in the range mounts on traffic cones.
360 degree amber cone lights
The 360 degree traffic cone light shows amber light all the way round the cone, so it is visible from any approach. Choose it for car parks, yards, depots, events and pedestrian zones where people and vehicles arrive from every side, and for marking a single obstruction such as an open chamber or a parked machine. It switches between flashing and steady light, so one stock of lamps covers both hazard marking and route marking.
Two-sided LED warning lamps
The two-sided MonoLight LED warning lamp shows its light front and back, so one lamp warns traffic in both directions on a two-way road and is seen by people walking on a footway beside the works. It is the general purpose lamp for roadworks, utility works and construction site perimeters, and it also switches between flashing and steady light.
One-sided cone lamps
The ConiLamp one-sided cone lamp shows its light on one side only, towards the traffic it faces. That suits closures on one-way roads, dual carriageways and slip roads, where the cone line is approached from a single direction and nobody needs to see the lamp from behind. Its bracket is built into the lamp, so it goes onto a cone without a separate fitting.
Sequential taper lamps
Sequential taper lamps link to one another by infra-red and flash one after another along the cones of a taper, so the light appears to run across the closed lane towards the lane that stays open. They are for lane closures on motorways, dual carriageways and other fast roads, where a driver approaching at speed needs to read the shape of the taper well before reaching it. No cables run between the lamps, so a set goes out and comes back in with the cones.
Sign lamps for temporary signs
The SignLite LED sign lamp casts white light forward onto the face of temporary traffic signs, including signs set on quick fit frames, so that drivers can read them after dark. It is made for lighting signs, so a cone line that has to show up at night still needs amber warning lamps, and a taper on a fast road still needs sequential taper lamps.
High intensity flashing warning lights
The Star-Flash LED high intensity warning light is the most intense flashing lamp in the range and stands out by day as well as at night. Choose it for fog, heavy rain and spray, for the approach to works on a busy road, and for incident scenes where an ordinary cone lamp would be lost among headlights and street lighting.

Amber, red, blue, magenta and white cone lamps
Amber is the general hazard colour for roadworks, site perimeters and pedestrian diversions, and every warning lamp type in the range is available in amber, from the 360 degree lamp to the sequential taper lamps. Blue is used where police or emergency services are working at an incident scene, and both the MonoLight LED and the Star-Flash LED come in blue. Magenta is the colour for work on and beside the railway, and the ConiLamp is the magenta lamp in the range. Red is used to mark a stop point or an obstruction where the job specification calls for it, and the MonoLight LED carries it. White is the sign lamp colour, carried by the SignLite LED.
The colour on a job is set by the traffic management plan, the highway authority, the rail operator or the client, so confirm it before ordering lamps for a new contract. Where a fleet works on both road and rail jobs, keeping amber and magenta lamps in separate stock stops the wrong colour going out to site.
Cone lamp lenses, light modes and batteries
One-sided, two-sided or 360 degree
The number of lit faces should match the number of directions from which the cone line can be approached. One-sided lamps have to be turned to face oncoming traffic when they are set out, and turned back if a cone is struck or moved. A single job can mix them, with one-sided lamps on a taper facing the traffic and two-sided lamps along a central run seen from both carriageways. The same count of approaches applies to lamps used along road barriers and water filled barriers on a closure.
Flashing or steady light
A flashing lamp draws the eye to a single point, so it is used at the start of works, at an obstruction and at incident scenes. A steady lamp gives drivers a continuous line to follow, which suits the long run of a cone line, where a row of flashing lamps can make the edge of the lane harder to judge. The Star-Flash LED and the sequential taper lamps work in flashing mode.
Batteries and run time
The 360 degree traffic cone light runs on standard AA cells, and every other lamp in the range takes a 6V lantern battery: the Premium 800, Konstant 25 or Konstant 45, depending on the lamp. Run time across the range spans roughly 150 to 3,800 hours, depending on the lamp, the battery and the light mode, and the same lamp runs considerably longer on flashing than on steady. In the lamps that take them, Konstant batteries give longer run times than the Premium 800, and the Premium 800 fits every lantern battery lamp in the range. Standardising a fleet on one battery type keeps changeovers simple, reduces the stock carried on vehicles and stops a crew arriving at a night shift with batteries that do not fit.

Popular Categories

Road Barriers
View Products >

Water Filled Barriers
View Products >

Cones
View Products >
Frequently Asked Questions
Will a cone lamp fit any traffic cone?
Cone lamps fit through the opening at the top of a road cone, either on a stem that pushes into the hole or on a bracket that holds the lamp above it. The 360 degree traffic cone light fits cone openings across a range of sizes, and the bracket-mounted lamps suit standard road cones with a top opening. Small sports markers, some collapsible cones and cones with a closed top have no opening to take a lamp, so check the cone tops before ordering lamps for an existing stock.
Can cone lamps be fitted to barriers or signs?
Yes. The MonoLight LED mounts onto safety barriers with its bracket as well as onto cones, and the Star-Flash LED mounts onto folding warning signs.
Can you buy traffic cones with lights?
HERMEQ sells the lamps separately, and each one fits onto a cone, so lamps can go out for night shifts and be taken off for daytime work. The 360 degree traffic cone light is made to fit HERMEQ's Starlite and Master cones, which are listed on the traffic cones page with the rest of the cone range.
Do cone lamps switch on automatically?
The ConiLamp and the Sequential Taper Lamp switch on automatically, and the sequential lamps start and link up with their neighbours as soon as they are placed on the cones. The other lamps are switched on when they are set out, and set to flashing or steady where they have both modes.
Are traffic cone lights suitable for all weather?
Every lamp in the range is made for outdoor use on live roads and open sites, in rain, wind and dust. Lenses that collect road spray show less light, so cleaning them at each inspection keeps a night closure as visible as it was on the first shift.
Which standards apply to traffic cone warning lamps?
Road warning lamps are covered by BS 3143 Part 2, the standard for road danger lamps, and by EN 12352, the European standard for warning and safety light devices used in traffic control. The Sequential Taper Lamp complies with both.










































































































































