Vehicle & Container Access
HERMEQ supplies container loading platforms and vehicle access equipment for accessing, inspecting and unloading lorries, trailers and containers on site. The steps and ramps are built in steel, and HERMEQ manufactures in the UK with in-house steel processing. The equipment is used in construction, logistics and event setups wherever people or goods have to reach bed height without a fixed loading dock.
The range covers mobile unloading decks, side access trailer steps and lorry steps, shipping container ramps and mobile forklift ramps, a roll cage and pallet lifter, and forklift man cages for work at height.
Container loading platforms, steps and ramps
The right type follows from how the goods leave the vehicle: cartons and loose stock carried by hand suit steps, pallet trucks and wheeled cages suit a deck at bed height or a lifter, and pallets collected by a forklift need a ramp, while forklift cages cover the separate job of lifting people to work at height.
Mobile unloading platforms for trailers
For rear unloading where the yard has no dock, a freestanding deck set at trailer bed height gives operatives somewhere to stand and work with pallet trucks, wheeled cages or hand loads. Our mobile unloading platforms are made with rungs or integral steps for access from the ground, and the wider versions give room for more than one operative at a time. Where pallet trucks and cages roll straight off the lorry floor, a bridging ramp closes the gap between the deck and the bed.
Side access trailer steps
Curtain-sided trailers are unloaded from the side, and a single set of steps only reaches the part of the bed directly in front of it. Side access trailer steps put a long walkway alongside the trailer, in platform lengths up to 6 m, so operatives can move along the full bed and hand down boxed stock, crates and materials without climbing up and down at each bay.
Lorry access steps
Drivers and warehouse staff who step up to a lorry bed to hand down parcels or cartons need compact mobile steps that can be wheeled to the tailgate. HERMEQ lorry access steps are made in several platform heights, so the top step can be matched to the beds the site sees most.
Shipping container ramps
A container standing on the ground has its floor only a short way above the yard, so the forklift or pallet truck needs a ramp that bridges the door sill and lets it drive straight in. The steel shipping container ramp fits standard container sizes and has a chequer plate surface for grip under the truck's wheels.
Mobile forklift ramps
When a forklift has to climb from yard level into a trailer, or into a container still on its trailer, a full-length yard ramp is needed. The mobile forklift ramp is a steel ramp with hydraulic height adjustment, a mesh surface and side raves, built in models rated for different truck weights. It can be repositioned around the yard to meet each trailer, which lets sites receiving full loads of palletised goods work without a fixed bay.
Roll cage and pallet lifters
Cages delivered on articulated trailers without a tail lift have to come down from bed height one at a time, and lowering them by hand puts the load and the operative at risk. The roll cage lifter mounts on a forklift and carries a loaded roll cage or pallet between the trailer bed and the ground.
Forklift access platforms and man cages
Lifting operatives on a forklift for maintenance, inspection or stocktaking calls for a guarded cage that locks onto the forks, known in the trade as a man cage, forklift work platform, safety cage or, in its collapsible form, a folding platform. The fixed forklift access platforms are made with a lift-up bar or side gate entry and suit a site that keeps a cage with one truck. Where the cage moves between sites or has to be stored in a small space, the folding forklift access platform collapses for transport. The forklift man cage is a guarded cage with a non-slip floor for teams working at height in pairs.
Fork pocket spacing differs across the range, so measure the truck's fork section and fork centres against the cage's pockets before ordering, and read the intended use against HSE guidance PM28, which sets out how a platform and truck are matched and used together. Fork-mounted equipment for handling materials rather than people is in the forklift attachments range.

Forklift ramp or unloading platform
The choice turns on whether a forklift has to drive into the vehicle. A ramp is right when pallets are stacked deep inside a container or trailer and a counterbalance truck has to drive in, pick them up and reverse out, because no platform or set of steps brings the forks to the load.
Once a ramp is the answer, the next question is where the load sits. A shipping container standing on the ground has its floor just above the yard, so a short container ramp over the door sill is all the forklift needs. A trailer on its wheels, or a container still on a trailer, puts the floor at full bed height, and reaching it takes a mobile yard ramp with hydraulic height adjustment. The yard ramps in the range work at bed heights up to 1.9 m and are rated for laden forklifts of up to 12 tonnes.
Unloading lorries and containers without a loading dock
Without a fixed bay, three checks made before ordering decide which versions of the steps, decks and ramps fit the site.
Bed heights across the fleet
The starting point is a record of the bed height of every vehicle that calls at the site, from articulated and rigid lorries to vans and containers delivered on skeletal trailers, with the lowest and the highest noted. A ramp's operating range has to cover both ends of that record, and steps are made in set heights, so a site served by mixed vehicles may need steps in more than one height.
Yard surface and moving between bays
The ground where the unit stands decides which version to order. On a flat concrete yard a fixed height deck stands level as delivered, while on uneven or sloping ground wind-down legs let the deck be levelled at each bay. Castored steps need firm, even ground under them, and a yard ramp needs hardstanding under its foot with enough clear length behind the trailer for the forklift to line up.
Loads, wheeled cages and capacity
Rated loads across the unloading steps and platforms run from 300 kg on hand-loading steps to 1200 kg on an unloading deck upgraded with heavy-duty wheels. Size the unit to the heaviest combination that will be on it at once, counting the operatives, the pallet truck or cage and the goods together. Forklift ramps are rated by the axle load of the laden truck, so the forklift's weight with its heaviest pallet sets the model, and man cages carry a limit in persons as well as kilograms.

Popular Categories

Tipping Skips
View Products >

Forklift Attachments
View Products >

Lifting Equipment
View Products >
Frequently Asked Questions
What is the maximum ramp slope for a forklift?
The forklift manufacturer sets the maximum gradient for each truck, laden and unladen, and gives it in the operator's manual. The slope on site depends on the height being climbed and the length of the ramp, so a higher trailer bed gives a steeper climb on the same ramp. Check the rating for every truck that will use the ramp before choosing a model.
Can a forklift be used to lift people?
Forklift trucks are designed for lifting materials, and HSE guidance PM28 allows a non-integrated working platform to lift people on a forklift in exceptional circumstances only. The guidance expects other means of access, such as scaffolding, tower scaffolds or mobile elevating work platforms, to be considered first.
Should a forklift work platform be CE marked?
No. HSE guidance PM28 states that non-integrated working platforms, the cages that sit on a forklift's forks, do not come under the Machinery Directive and should not be CE marked.
How is a container ramp secured to the container?
The shipping container ramp can be supplied with chains and D shackles that fix it to the container and hold it against the sill while the forklift crosses. The mobile forklift ramp comes with securing chains and wheel chocks for the trailer it serves.
How are mobile unloading platforms moved between loading bays?
Mobile unloading platforms can be ordered with forklift pockets, so a forklift lifts the deck and carries it to the next bay, where jacking legs hold it steady. Heavy-duty wheels are available for decks that move often or carry heavier loads. Side access trailer steps and lorry access steps run on wheels or braked castors and are pushed into position by hand.
Where are the platforms made?
The unloading decks, trailer and lorry steps, shipping container ramp, roll cage lifter and forklift access platforms in this range are made in the UK. Several lines, including the forklift access platforms and the shipping container ramp, are held as permanent UK stock with next day delivery available.










































































































































