Crane Lifting Equipment
HERMEQ crane lifting equipment covers the cages, forks, grabs, skips and hoists that move materials, waste and equipment around construction and industrial sites under tower, mobile and site cranes. The range takes in lifting cages for cranes, crane forks, block grabs and kerb lifters, crane skips, chain blocks, lever hoists and beam clamps, for lifts at ground level and loads landed at height.
Chain blocks meet the WLL performance requirements of BS EN 13157, heavy duty beam clamps those of BS EN 13155, and the crane tipping skips carry LOLER certified lifting lugs. Much of the range is made in the UK, with in-house steel processing.
Lifting cages for cranes
Open mesh goods cages move loose materials from one lift to the next, while the lockable, IBC, access and rescue cages are each built around a particular load: secured tools and rigging, liquid containers, access work and casualties.
Goods carrying cages
The goods carrying cages take loose fittings, tools, components and debris that cannot be strapped to a pallet or carried on forks. The 3 tonne heavy duty goods cage has an anti-slip mesh floor, and its double versions have a loading ramp on the long or the short side.
Lockable lifting and rigging storage cages
When the contents must stay secure between lifts, the forklift and crane lifting cage is a sheet steel crate with crane lifting eyes and deadbolted doors, used to store and move heavy tools and equipment on large sites. The rigging storage cage keeps chains, slings and other rigging gear in a lockable, weather-resistant mesh enclosure, so the lifting accessories stay together and in one place for inspection.
IBC lifting cages
Most intermediate bulk containers have no crane lifting points of their own, so the IBC lifting cage houses the container and takes the lift through lifting eyes at all four corners. A removable front bar gives access to the container without lifting it out of the cage, which matters when it is drawn from on site.
Access and rescue cages
The crane and fork mounted access cage gives an access platform at height from the crane hook or from the forks of a truck. The crane rescue cage belongs in the emergency plan for elevated and enclosed work areas where a casualty cannot be carried down by hand, and it is chosen alongside the fall arrest and edge protection kit in the wider working at height equipment range.

Crane forks, block grabs and kerb lifters
Whole packs and single heavy units take different attachments: forks and grabs carry a palletised pack in one lift, while kerb lifters and handles take one stone at a time.
Crane pallet forks
The self-balancing crane pallet forks hang from the crane hook and stay level as the load goes on and comes off, with safety nets to contain the pack in the air. They are the general choice for palletised building materials landed on slabs, scaffolds and loading bays. For packs of bricks, the telescopic self-levelling crane forks adjust in length and level themselves under load, which keeps the pack square through the lift.
Block lifting grabs
A block lifting grab closes around a palletised load of bricks, slabs or paving blocks and holds it inside a frame for the whole lift. Paving and hard landscaping contractors use it to move full packs from the delivery point to the laying face, and it suits loads that are better held from the sides than carried on tines.
Kerb stone lifters and handles
For single kerbs, blocks, slabs and steps, the kerb stone lifter and the kerb stone handle grip one unit between adjustable jaws. Both can be carried by hand or hung from a crane, so one tool sets a kerb run and lifts heavier units into place. The handle is rated for the heavier stones, and the lifter has replaceable rubber jaws to protect finished faces and an automatic release for setting down.
Brick baskets
A brick basket hangs from an overhead crane lifting point and carries small quantities of bricks and materials, such as a top-up for a bricklaying gang, where a full pack on forks would be more than the work needs.
Crane skips for muck, waste and concrete
Boat skips
Boat skips move muck, rubble and general waste off high-rise and restricted access jobs, where the crane is the only way out for spoil. The crane lift boat skip discharges automatically once it is lifted and released and needs no manual reset between cycles. The self-dumping boat skip tips through a shark fin mechanism and locking bale arm during the lift. Both have a low loading height for filling by hand, and sizes run up to 4000 litres for dense loads such as concrete and earth.
Tipping and circular skips
The crane tipping skip is a heavy steel skip lifted from its lugs, with a locking mechanism that holds it until the operative releases it, and it comes in several capacities for waste from hard-to-reach areas. The circular tipping skip tips under gravity as soon as its manual safety lock is opened, and its round body can be positioned facing any direction, which helps where the skip has to be landed in a tight corner.
Drop bottom skips
The drop bottom skip empties through a flap in its base with no tilting, so the load falls straight down into a container, hopper or lorry body below. It stacks for storage, which saves yard space when several skips are kept on site.
Concrete pouring skips
A concrete pouring skip places wet concrete through a gate, chute or hose that the operator controls, so the pour goes into shuttering, columns and slabs at a controlled rate. The twinflow concrete skip pours from the bottom for mass pours or from the side for shuttering. The coneflow concrete skip has a geared gate and lateral outlet for steady flow, and the concrete skip with hose outlet directs the pour into formwork. The full choice sits on the concrete pouring skips page.

Chain blocks, lever hoists and beam clamps
Chain blocks
Chain blocks raise and lower a load straight up and down from a fixed overhead point, with the operative pulling a hand chain to drive the load chain. They are the choice for vertical lifts in plant rooms, workshops and under gantries, with capacities up to 10 tonnes and chain lengths to match the height of lift.
Ratchet lever hoists
Ratchet lever hoists lift, lower and pull with a lever and ratchet, and they work at an angle or horizontally as well as vertically. That makes them the tool for tensioning, drawing equipment into line and short lifts where there is no headroom to hang a chain block.
Beam clamps
A beam clamp fixes to the flange of an I-beam or other structural steel and gives a hanging point for a hoist, block or rigging without drilling or welding the beam. The adjustable beam clamps open to suit beams of different sizes for everyday loads, and the heavy duty beam clamps take loads up to 20 tonnes.
Matching crane lifting equipment to the load
The choice of attachment starts with the load and the machine that will lift it, and it is settled by checking the full weight against the rated load.
Loose goods, packs or single units
Palletised brick and block packs go on crane forks or in a block grab, and single kerbs, steps and slabs go in a kerb lifter or handle. Loose fittings, tools and debris go in a goods cage, IBCs go in an IBC lifting cage, wet concrete goes in a concrete pouring skip, and muck and waste go in a boat, tipping, circular or drop bottom skip. A mixed load, such as tools with a few loose blocks, belongs in a cage, because loose items should never ride on open forks.
Crane, forklift or both
Goods carrying cages, the lockable lifting cage, the rigging storage cage, the access cage and the drop bottom skip take either a crane or a forklift, which suits sites where the crane is booked for other lifts and materials still need moving at ground level. Boat skips are crane-lifted, and forklift versions sit in the tipping skip range for ground-level work. Where there is no crane, the fork mounted extendable jib gives a forklift a hook with adjustable reach and angle for awkward and tall loads, and the drum tilter mounts on the tines to lift and tip plastic and steel drums.
Loaded weight, not volume
A skip's capacity in litres says how much it holds, and its safe working load says how much it may carry; across the range, a concrete skip and a muck skip of the same volume carry different safe working loads. Size the skip by the heaviest load it will carry, confirm that weight against the SWL marked on it, and add the weight of the skip itself when checking the crane's capacity at the working radius.

Popular Categories

Edge Protection System
View Products >

Stairways & Bridges
View Products >

Fall Arrest Systems
View Products >
Frequently Asked Questions
Which lifting cage is designed to carry a person?
The crane rescue cage is the cage in the HERMEQ range built around a person: it takes a casualty lying on a stretcher with a first-aider alongside, inside a fully enclosed cage with a door at each narrow end. Goods carrying cages, lockable lifting cages, rigging storage cages and IBC lifting cages are for goods only and must never be used to lift people. Any lift of a person by crane needs its own lift plan by a competent person.
What does a LOLER thorough examination mean for crane lifting equipment?
Under the Lifting Operations and Lifting Equipment Regulations 1998, lifting equipment and lifting accessories must be thoroughly examined by a competent person before first use and then at intervals set by the regulations or by a written examination scheme. The intervals are shorter for lifting accessories and for equipment used to lift people. Cages, forks, grabs, skips, hoists and beam clamps all fall within the regulations, and each needs a current report of thorough examination before it goes on the hook.
What is the difference between SWL and WLL?
Both describe the maximum load an item of lifting equipment may lift in normal service. Working load limit (WLL) is the term used in current standards and is set by the manufacturer, while safe working load (SWL) is the older term that is still marked on many cages, skips and forks. A competent person may set an SWL below the WLL for particular conditions of use, but never above it.
Is a chain block the same as a chain hoist?
Yes. Chain block, chain hoist and hand chain hoist are names for the same manual lifting device, which raises and lowers a load chain when the operative pulls the hand chain. A ratchet lever hoist, also called a lever chain hoist or ratchet lever block, is a different tool that is worked by a lever and can pull as well as lift.
What does BS EN 13155 cover?
BS EN 13155 is the standard for non-fixed load lifting attachments, the equipment fitted between the crane hook and the load, such as lifting beams, clamps, lifting forks and grabs. It sets the safety requirements and the working load limit performance those attachments must meet. Slings and hooks are covered by their own standards.










































































































































