Stairways & Bridges
HERMEQ temporary stairs and bridges give safe, stable access between elevated working areas, from scaffold lifts and floor slabs to embankments and excavations. The range covers folding site stairways, modular steel stairways, spiral staircases, modular stair towers and pedestrian bridges, so teams move between levels, structures and platforms by stair instead of by ladder. Non-slip treads and handrails give firm footing and a secure hold, and the stairs work alongside scaffolding and other access systems.
They connect scaffold decks, give interim access while permanent stairs are still to be fitted and take people across trenches and services. Contractors use them in construction, civil engineering, maintenance and industrial work.
Temporary stairs, stair towers and site bridges
Temporary stairs climb a change in level, from a step-up onto a cabin to a multi-storey frame. Temporary bridges carry people across a gap or over an obstruction at ground level.
Folding temporary stairways
A folding temporary stairway is the quickest way to put a short flight where a ladder would otherwise go: onto welfare cabins, plinths, loading bays and the first lift of a scaffold. It folds for transport and storage, so it suits stairs that move from job to job.
Modular steel stairways and embankment steps
The modular steel stairway is built from units that join to the height the site needs. That makes it the stair for heights set by the ground. It is used as embankment steps on slopes and batters, as trench steps into excavations, and as fixed access onto scaffold decks and between floors on phased construction.
Temporary spiral staircases
A temporary spiral staircase rises in stacked modules and turns around its own centre. This lets it reach multi-storey heights within a small plan area beside the building. Choose it where a straight flight or a scaffold stair would take up too much ground.
Modular site stair towers
The modular site stair tower, the Escalib Mills MDS, stacks stair modules into a tower. Its side exits can be turned to meet the slab or working platform at each level. Folding guardrails form part of each module and are used through erection and dismantling. This makes it the choice for concrete and steel frames, infrastructure and industrial construction, where people need protected access from the first lift.
Temporary pedestrian bridges
A temporary pedestrian bridge spans an open trench or gap so that people can cross on foot, on construction sites and in event areas. It folds for transport and locks open for use.
Up and over bridges
An up and over bridge takes people up a short flight, across a deck and down the other side. It crosses pipelines, hoses, cables and other services that run along the ground and cannot be covered or moved. Its height adjusts to the obstruction, and it relocates quickly as the line of work moves on.

Temporary stairs by floor-to-floor height
The height of the climb narrows the choice more than anything else. Across the range, temporary stairs cover rises from about half a metre to around 20 metres. For a low step-up onto a cabin, a plinth or a raised slab, a short folding temporary stairway or a few modular steel units is enough. A single storey, a scaffold lift or the face of a deep excavation suits the longer folding flights or a modular steel stairway built up unit by unit.
Multi-storey access belongs to the spiral staircase and the stair tower, which both add a module for each storey of rise. Measuring the actual rise from the lower standing level to the upper one, and buying to that figure, avoids a flight that lands short or too steep.
Temporary stairs for construction, groundworks and embankments
Between floors on new build and frame construction
Before the permanent stairs go in, bricklayers, carpenters, electricians and the other following trades need regular access to upper floors. A fixed stair lets them carry tools and materials with one hand on the rail. On concrete and steel frames, the stair is planned into the slab sequence so that each new floor has access as soon as it is safe to work on.
Embankment steps and slopes
A trodden path on a batter turns to mud in wet weather and gives no handhold. For this reason, groundworks and civils sites put in fixed embankment steps wherever operatives climb a slope more than occasionally. The modular steel stairway is made for this, with non-slip treads for wet and muddy conditions.
Trench and pipeline crossings
Foot crossings are kept apart from plant and vehicle crossings, which carry very different loads. Pedestrian and up and over bridges cover the foot route. For plant and vehicles over an open excavation, trench bridges carry the load. Narrow trenches in a footway are closed over flush with trench cover boards.

Checks before ordering site stairs
Fixing to scaffold or slab
The top of the flight has to bear on something that can carry it, either scaffold tube or a concrete slab. The modular steel stairway is ordered with a scaffolding attachment or a slab attachment, and with or without a support, so this is settled at the point of order. Stair towers and spiral staircases stand on their own base, which needs firm, level ground or a slab.
Footprint and landing space
A straight flight runs out across the ground as it rises. The plan length therefore needs measuring along with the rise, together with clear standing space at the foot and a landing at the top that is kept free of materials. Spiral staircases and stair towers need their full base area, plus a clear route away from the bottom step and from each exit.
Craning in and repositioning
Spiral staircases and stair towers are assembled and moved by crane. The job is planned around crane reach, a clear lifting area and the lifting procedure in the technical instructions. A complete stair tower can be craned to a new position in its prescribed configuration, which saves taking it down between phases.
Handrails, guardrails and edge protection
Where a stair lands on a floor, a scaffold or a platform, the open edges either side of the landing need guarding, along with any stairwell opening. Edge protection closes the slab edge and the stairwell. Handrail systems give a continuous rail along walkways and landings.
Popular Categories

Edge Protection System
View Products >

Crane Lifting Equipment
View Products >

Fall Arrest Systems
View Products >
Frequently Asked Questions
What is a temporary staircase?
A temporary staircase is a site stair put in for the duration of the work. It gives safe access between levels where there is no permanent stair yet, or where the works themselves create the level change, such as an embankment, an excavation or a scaffold. It is removed or moved on once the permanent route is ready.
What standard applies to temporary stairs and stair towers?
The temporary spiral staircase complies with BS EN 12811, the European standard for temporary works equipment such as scaffolds. A stair tower built beyond its standard configuration is planned through a design study, which sets the temporary works requirements for that tower.
Can a temporary stairway be used as a gangway?
Yes. Most sizes of the folding temporary stairway can be laid across a trench and used as a gangway, and the longest flights do so when fitted with a truss. The shortest flight is used as a stair only. For a crossing that stays in place through the job, the temporary pedestrian bridge is designed for the purpose.
Do temporary stairs need handrails?
Yes. A handrail gives operatives a handhold for the full climb, and a flight with open sides needs guarding on both of them. The modular steel stairway has a handrail on each side.
What are temporary stairs and bridges made of?
The folding stairways, modular steel stairways and pedestrian bridges are made of steel. The modular stair tower is galvanised steel, with a stainless steel option.










































































































































