HERMEQ UK
HERMEQ Ireland
HERMEQ Netherlands
HERMEQ France
HERMEQ DACHChapter 8 Barrier Lamp
Product Highlights
- Automatic low-light activation – A built-in photocell switches the lamp on as light levels fall and off again in daylight.
- Flashing or steady operation – Select between two lighting modes to suit the required barrier setup.
- Stack-friendly barrier fit – The compact lamp can remain attached while compatible HERMEQ plastic road barriers are stacked.
Alternative Products
SKU PB3297
The HERMEQ Chapter 8 Barrier Lamp is a battery-powered warning lamp designed to fit HERMEQ plastic road barriers. It offers flashing and steady light modes, automatic low-light activation through a photocell sensor and an IP54-rated housing. Its compact design also allows compatible barriers to be stacked without removing the lamp.
Designed as a dedicated warning lamp for HERMEQ plastic road barriers, this Chapter 8 Barrier Lamp provides additional visibility in low-light barrier layouts without adding unnecessary complexity to setup and storage.
- Photocell-controlled operation – Automatically activates in low-light conditions, reducing the need to switch individual lamps on and off each day.
- Two selectable light modes – Choose flashing or steady illumination using the lamp's internal switch.
- Fits HERMEQ plastic road barriers – The lamp attaches using a clip and security fixings for a secure barrier-mounted installation.
- Battery powered – Runs on two AA alkaline batteries, allowing use without an external power supply. Batteries are not included.
- IP54-rated housing – Provides a confirmed level of protection against dust ingress and splashing water for outdoor use.
In flashing mode, the lamp produces a single flash 30 times per minute, with a flash duration of 200ms and an output of 0.8 candela. Battery life is stated as up to 1,500 hours in flashing mode. Steady mode provides an output of 0.95 candela with a stated battery life of up to 750 hours.
At 227 x 115 x 80mm and 332g, the unit is compact enough to remain installed during stacking. This makes it particularly useful for contractors, utilities, local authorities and traffic-management teams regularly deploying, collecting and storing compatible barriers.
This barrier lamp enhances visibility on plastic road barriers, water-filled systems and road signs in construction, road works, or public event setups. The stack-friendly form saves space and effort in handling, and its dual lighting options adapt to various safety needs.
Need any help? Contact HERMEQ Today.
Contact our team via phone 0800 043 2520, email sales@hermeq.com or use our live chat feature between 8:00am & 17:00pm for help discovering our range.
| Light Modes | Flashing and steady |
|---|---|
| Activation | Photocell / automatic low-light activation |
| Flash Pattern | Single flash, 30 per minute |
| Flash Duration | 200ms |
| Brightness - Flashing | 0.8 candela |
| Brightness - Steady | 0.95 candela |
| Battery Life - Flashing | Up to 1,500 hours |
| Battery Life - Steady | Up to 750 hours |
| Batteries | 2 x AA alkaline |
| Batteries Included | No |
| IP Rating | IP54 |
| Dimensions | 227 x 115 x 80mm |
| Weight | 332g |
| Mounting | Clip with security fixings |
| Compatibility | HERMEQ plastic road barriers |
| Stackability | Compatible barriers can be stacked with the lamp fitted |
What is a Chapter 8 barrier lamp?
A Chapter 8 barrier lamp is a warning light fitted to temporary road or pedestrian barriers to improve their visibility in low-light conditions. This HERMEQ model is designed specifically for HERMEQ plastic road barriers and provides both flashing and steady illumination.
Which HERMEQ barriers does this lamp fit?
The lamp is designed to mount onto HERMEQ plastic road barriers using the supplied clip and security fixings. Compatibility with products outside the HERMEQ plastic barrier range should be confirmed before ordering.
Does the barrier lamp flash or stay permanently lit?
Both options are available. An internal switch allows the lamp to operate in either flashing or steady mode. In flashing mode, the lamp produces one flash 30 times per minute with a 200ms flash duration.
Does the barrier lamp switch on automatically?
Yes. A photocell detects low-light conditions and automatically activates the lamp as daylight falls. It switches off again when light levels increase.
What batteries does the Chapter 8 Barrier Lamp use?
The lamp requires two AA alkaline batteries. Batteries are not included. The stated battery life is up to 1,500 hours in flashing mode and up to 750 hours in steady mode.
Can barriers be stacked with the lamp fitted?
Yes. The compact housing is designed so compatible HERMEQ plastic road barriers can still be stacked without removing the lamp. This reduces the need to repeatedly remove and reinstall lamps during transport or storage.
What is the IP rating of the barrier lamp?
The Chapter 8 Barrier Lamp is IP54 rated, providing protection against limited dust ingress and splashing water for outdoor use.
